Mode Analysis of Cascaded Four-Conductor Lines Using Extended Mixed-Mode S-Parameters |
Nan Zhang, Wansoo Nah |
Department of Electronic and Electrical Engineering, Sungkyunkwan University |
Correspondence:
Wansoo Nah,Email: wsnah@skku.edu |
|
|
|
Abstract |
In this paper, based on the mode analysis of four-conductor lines, the extended mixed-mode chain-parameters and S-parameters of four-conductor lines are estimated using current division factors. The extended mixed-mode chain-parameters of cascaded four-conductor lines are then obtained with mode conversion. And, the extended mixed-mode S-parameters of cascaded four-conductor lines can be predicted from the transformation of the extended chain-parameters. Compared to the extended mixed-mode S-parameters of four-conductor lines, the cross-mode S-parameters are induced in the extended mixed-mode S-parameters of cascaded four-conductor lines, due to the imbalanced current division factors of cascaded two sections. The generated cross-mode S-parameters make the equivalent different- and common-mode conductors not independent from each other again. In addition, a new mode conversion, which applies the imbalanced current division factors, between the extended mixed-mode S-parameters and standard S-parameters is also proposed in this paper. Finally, the validity of the proposed extended mixed-mode S-parameters and mode conversion is confirmed by a comparison of the simulated and estimated results of shielded cable. |
Key words:
Cascaded, Current Division Factors, Extended Mixed-Mode S-Parameters, Four-Conductor Lines, Mode Analysis |
|